There are several types of welding that you can use to become listed on materials together. I will be talking about the welding of metal to metal and steel to steel.

The most typical forms welding are:

Wire feed welding - which a lot of people describe as mig, mag, gasless or flux cored.
Arc welding - also called stick welding
Tig welding -
Gas welding
Spot welding
Wire feed welding can also be called MIG welding. The proper term is GMAW or Gas Metal Arc Welding. When working with this welding technique you have a torch or gun with your hand and squeeze a trigger. Once you squeeze the trigger, wire inside torch will quickly turn out. This wire is then pointed at what you would like to weld.

The technical name for arc welding is SMAW or MMAW. That is Shielded or Manual Metal Arc Welding. On this occasion you use an electrode that is just a duration of filler wire that is an average of about 1 foot long which is covered in the flux. Because you utilize the rod the flux will burn up and develop a shielding gas that protects the weld.

Tig welding is definitely a fine and delicate welding technique. For this you should hold you torch in a hand and use a filler rod from the other. The concept is that you simply slowly feed the filler rod in to the weld as you go along. You can weld with TIG or GTAW, Gas Tungsten Arc Welding without needing the filler rod and simply just melt the two components of metal together. This is what's called "fusing", where using the heat from arc you melt and fuse it together.

And also the last different sort of welding you have is called "spot welding". This is often useful for sheet metal fabrications. In a nut shell both bits of metal that need to be joined are put involving the electrodes for the ends in the arms in the unit. They are offered together along with the welded part is going to be between those points. It is simply normally a second possibly even for this to happen. Only a buzz and it's done. This is a very quickly method of joining sheet metal parts. Things such as toolboxes are a great example of what can be and therefore are spot welded.

There's also a number of other different types of welding processes for metal like friction, ultrasonic, thermite and sub arc simply to mention a few.

But undoubtedly those mentioned above are the most typical today.

More info about Khuon han hoa nhiet have a look at this useful site.